Treadfast ES300 is an accelerated cure surface damp proof membrane for concrete and sand/cement surfaces. A surface DPM, which bonds to the surface of the concrete, minimises moisture vapour transmission. It therefore prevents moisture build-up beneath all floor coverings. To determine the most suitable and cost effective surface DPM for any application, It is essential to determine the relative and moisture vapour transmission rate of the substate and floor covering.

Checking Moisture Content,

Concrete can contain residual moisture from construction or in cases where there is no dampproof membraine or where the DPM has failed. Moisture can rise into the slab from the ground water. The presence of moisture and alkalinity can compromise both the structual integrity and the finish of the floor. For example above 75% relative humidity (RH) adhesive strength often declines significantly and there is high potential for mould growth, in addition, floor coverings reduce moisture vapour release, thereby trapping moisture and causing blisters and adhesive failure.

Allows the early laying of wood floors, cures in half the time of conventional epoxy systems, over 20 years of trouble free history and approved by major floor covering manufactures.

 Free delivery on all Tremco products

To view Product Data Sheets in PDF format please click below: