Shopping Cart
You have no items in your shopping cart.

Fiddes Hardwax Oil 1L


Manufacturer: Fiddes
 
A blend of natural oils & waxes offering exceptional durability & resistance for internal natural wood flooring, kitchen worktops (wood) and areas subjected to a high degree of wear.
Produces a quick drying, natural satin / matt water repellent, tread-fast finish that will not peel or flake. To maintain / renovate, simply wash, buff or re-apply, following the guidelines below.
 
Suitable for application onto children’s toys – EN 71-Toy Safety Certification
Resistant to liquids: Tested in accordance with BS 3900 G5
Resistant to wear: Tested in accordance with BS3900 E15

Preparation
Ensure all surfaces are clean, dry, and free from any previous finish. Sand the substrate with a fine 150 grade sanding paper or 150 grit sanding disk, removing all traces of dust.

Application
Ensure all areas to be coated are extremely well ventilated during and after application. Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Apply at room temperature. Fiddes Hard Wax Oil is formulated for application directly, and does not require thinning.
 
First Coat - Stir contents thoroughly before and during use, and apply in a warm, well ventilated room. Apply THINLY using Fiddes Floor Oil Brush or a good quality bristle or synthetic brush, and lay EVENLY, following the direction of the grain. Leave to dry 4-6 hours in warm, dry well ventilated conditions, or preferably overnight.

Second Coat - Apply as first coat, THINLY, allowing good ventilation. Leave to dry 4-6 hours in warm, dry well ventilated conditions, or preferably overnight. Clean applicator with White Spirit. When the surface area is completely dry, a light buff will further enhance the sheen level.

Notes
    Ensure all areas to be coated are extremely well ventilated during and after application has occurred.
    Always test on small area prior to major application. Clean applicators with White Spirit.
    Certain dense or oily substrates may only require a single application, and subsequently buffed to achieve the desired finish.
    Longer drying periods may occur during application in cold, damp or humid conditions.
 
Re-Application: To renovate previous application of Fiddes Hard Wax Oil, lightly sand area with 150 grit sandpaper, and re-apply sparingly.
Coverage: A single application will cover approximately 20-24 square meters per litre,depending on the density of the substrate.
Packaging: 5ml - 250ml - 1lt - 2.5lt


* Finish / Sheen
SKU: FDDS/HWO/1L

£27.00
Quantity
Customers Who Bought This Item Also Bought
Picture of Lecol 7500 Resin Filler Filler can be used for spot filling of cracks and knots and also mass filling of parquet blocks
From £17.40
Picture of 10mm Unfinished Solid Oak Radiator Pipe Ferrules Twin Pack Unfinished Oak Pipe Covers £5.76
£4.74
Picture of WOCA Worktop Oil 0.75L A highly water- and dirt-repellent oil for wood surfaces.
£21.60
Picture of Woca White Polishing / Buffing Pad with Handle WOCA Buffing Pad for the polishing / application of WOCA Oils and Pastes
£7.80
SSL=True