Rubio Monocoat Precolor Easy
Prices From £9.60 to £44.33

Rubio Monocoat Precolor Easy is a pre-colour, designed to be used in combination with the RMC Oil Plus 2C, to create special effects
and contrasts, while the optimal molecular bonding of the RMC Oil Plus 2C with the wood remains guaranteed. The option to choose a combination of 14 different colours of RMC Precolor Easy (which can be mixed with one another) with a finish in one of the 40 colours of the RMC Oil Plus 2C range allows unlimited creative possibilities, while the optimal molecular bonding of the RMC Oil Plus 2C with the wood remains guaranteed.

• Available in 14 different colours, which can be mixed.
• Unlimited creative possibilities.
• Easy to apply.   Can also be applied with a polisher.
• Packaging: 100 ml bottle, 1 L can.

APPLICATION:

• 1. Sand the surface according to professional standards.
  When renovating old floors, you must remove all the residues from previous treatments completely (varnish, oil, wax, etc.).
• 2. Vacuum the floor with an industrial cleaner, then apply RMC Cleaner.
• 3. Stir the product thoroughly and regularly with a stirring rod.
  • Manual application:
    • Work in areas sized to allow manual touch-ups without
    having to tread the finished area. If necessary, use tape to
    tape off areas.
    • Apply RMC Precolor Easy in crosswise direction using a
    (mohair) roller.
    • Spread evenly using a lint-free cloth.
  • Mechanical application:
    • Work in areas sized to allow manual touch-ups without
    having to tread the finished area. If necessary, use tape to
    tape off areas.
    • Apply RMC Precolor Easy in crosswise direction using a
    (mohair) roller.
    • Polish using a floor polisher with a red RMC Pad. As soon as
    circles are no longer visible, stop polishing (do not rub dry).
    • Now, rub the borders evenly using a scrubby and a red RMC
    Pad.
• 4. Allow the surface to dry for 1 to 3 hours. The exact drying time depends on the foundation, moistening, temperature and ventilation.
  For any overlapping: see remarks!
• 5. Apply the RMC Oil Plus 2C.

Remarks:

- Any overlapping can be removed! Spray clean water on the floor and polish with a polisher or scrubby with a red RMC Pad.
- Any overlapping WILL NOT be removed when applying the oil. It is important to remove any overlapping areas before applying the oil.
- If any wood fibres are still upright, you will need to grind these using a floor polisher equipped with a beige pad. Afterwards, vacuum thoroughly.

 ADVICE:

- Switch off the floor heating 48 hours before application.
- Do not use in combination with water based finishing products!
- Do not apply as a covering or film-forming layer!
- Difficult to apply on herringbone parquet.

CONSUMPTION:
1 L = 15 - 20 m2, depending on the sort of wood and the preparation.
These usages are merely indicative. It is always recommended to make a sample in order to calculate the exact usage.

TECHNICAL CHARACTERISTICS:
Physical state at 20 °C: liquid
Flash point [°C]: N/A
Density: between 1 kg/L and 1,16 kg/L according to colour
VOC content: 0 g/L
Solubility in water: 100 %
STORAGE: The product can be stored for up to 12 months.
Store in dry conditions, in the original packaging, at a temperature of 5 to 25°C.
The product is frost sensitive, use frost-free storage and transport only.
PACKAGING: Bottle 100 ml, can 1 L, 2,5 L and 5 L

ATTENTION: This product is a pre-treatment and does not protect the wood. It has to be combined with one of our Rubio Monocoat finishing products for maximum protection.

 RMC Pre Color Easy Colour Card