SikaBond®- Rapid DPM is a solvent free, single part moisture curing reaction polyurethane primer and damp proof membrane for cement-based substrates.
SikaBond - Rapid DPM is a solvent free, single part moisture curing reaction polyurethane primer and damp proof membrane for cement based substrates.
USES, For Priming, Consolidating and Sealing of:
- Absorbent and Non-absorbent sub-floors, consolidating weak cement screed and isolation of old adhesive residues.
- Can be used as a Damp Proof Membrane on sub-floors not under hydrostatic pressure.
- Can be used over underfloor heating. (Max 3% moisture CM Method, 4.5% Tramex).
Characteristics / Advantages:
- 1-part, ready to use.
- Rapid drying (approx 45 minutes at 50% Rh & 20oC).
- Compatible with all SikaBond wood floor adhesives.
- Especially suited to refurbishment projects where old adhesive residues are present.
- Suitable for underfloor heating.
- Applied by roller or squeegee.
Consumption:
As a surface conditioner/primer:
Apply 1 coat at a minimum consumption of 100 – 200 grams/m2 (85-170 ml/m2)
As an isolator for old adhesive residues:
Apply 1 coat at a minimum consumption of 100 – 200 grams/m2 (85-170 ml/m2)
As a Damp Proof Membrane: (tested in accordance with ASTM E 96)
Apply 2 – 3 coats at 100 – 250 grams/m2 (85-215 ml/m2).
Allow each coat to fully cure. Total consumption should be no less than 400 grams/m2 (340 ml/m2).
Technical Data
MSDS Data
